Welding Tips and Tricks Podcast

For this weeks episode we had a fun chat with @arenjenkins.  We had a chance to meet Aren at the past few Fabtechs and it is always a pleasure. We thought it would be fun to have him on because Aren live and works in a small town in Alaska. Hearing just how different it is and how sometimes you just have to make due with what you have made for an interesting conversation! Enjoy! Thank you to Clash of the Grinders by 3M for sponsoring this episode! Head over to 3M.com/PodClash to enter!

For this episode we thought it would be fun to talk all about Tungsten Grinders.  Roy recently upgraded his Sharpie grinder from Arc-Zone which sparked an interest to talk more about that tool and others like it.  Are they worth it or not?  Find out and maybe you'll look at how your sharpen you tungsten a little differently after listening!  Enjoy Thank you to Clash of the Grinders put on by 3M for sponsoring this episode! Be sure to head over to 3m.com/podclash to enter!

For this weeks show we had a fun conversation with Larry and Dave from @P2ind. You need to be following these guys! They put a big twist on industrial furniture and many other things. If you can think it, they can build it. These guys have a great outlook and it really shows in their work. We hope you enjoy this episode as much as we did! Enjoy! Thank you Clash of the Grinders put on by 3M for sponsoring this episode. Head over to 3m.com/PodClash to enter!

During last weeks After Show we had talked about welding razor blades together with the Fronius MagicWave 230i and Jody had asked about using High Speed Pulse. After that we thought it would be a good topic so here it is! Have you ever tried it? If not, you'll want to take some notes and if you think the project you're working on could benefit from it, do some tests! Enjoy! Thank you for Clash of the Grinders by 3M for Sponsoring this episode! Head over to 3m.com/PodClash to enter this years event!

For this episode we had a great time chatting with @5thstreetfab aka Max Hemphill. If you're not following Max stop now and go do it! Max has some amazing aluminum welds and much more! Talking with Max we learned a lot about the type of work he's doing and some tricks to how he gets those perfect welds. Be sure to take some mental notes! Enjoy! Thank you to 2nd Annual Clash of the Grinders at Fabech 2019 by 3m for sponsoring this episode! Please head over to 3m.com/podclash to sign up!

We've been asked a few times to do a topic episode about Tig Torch Amp Controllers. There are loads of different types and styles out there and we have used a lot of them so we go over some that we've liked and some that we didn't like. We know that there are many more styles out there that we've never seen before too. This episode is more just an overview of the basic styles to let you know the different options out there. Enjoy! Thank you to 3m.com/PodClash for sponsoring this episode!

For this episode we all were out of town so we were not able to record but thought it was a good time to re-post an old episode with Cody Swinehart from Quarter Tilt Kreations.  This was a really great episode!  The audio is a little rough but the content is great!  This also shows you how far we've come with the podcast! Enjoy! Would like to thank our Sponsor for this episode 3M and the Clash of the Grinders at Fabtech 2019! To enter head over to 3M.com/PodClash. 12 will be selected only 1 will win

For this episode our special guest is Mike Challgren.  If you are apart of the welding community on Instagram we're sure you have heard that name and seen Mike's great wire frame sculptures.  We have been wanting to get Mike on for a long time now and finally were able to make it happen.  We enjoyed hearing about Mike's past and what lead him to where he is today.  Hope everyone enjoys this episode as much as we did.   

We've been getting a bunch of emails and DMs asking about different troubleshooting issues so we thought it would be a good time to have another Troubleshooting conversation!  Our last Troubleshooting episode was 55.  We hope that we touch on something that you might have been having problems with and or can stick in your mental notes for a later date!  Thank you everyone for the support!  Enjoy!  Thank you ZTFab for sponsoring this episode! Check out all-a-cart.com and don't forget PODCAST at checko

For this weeks episode we had a great time chatting with @Lattinprecision aka Eli Lattin. If you're not following Eli you need to stop everything now and go follow!! Eli is a wealth of knowledge and he really dropped a lot of it in this episode. If you're new to the game or a seasoned veteran you'll really want to pay close attention and take some good mental notes. Thanks again Everyone!! Enjoy!

For this episode we thought it would be a good time to stop and take a few to look back at how our 2019 is going.  Mid Year Review from what we said we wanted to do at the beginning of the year.  It's crazy to think that 2019 is half over!  Hope this episode helps you stop and review how your year is going and get you thinking of how you would like to finish out 2019!  Thanks again for listening!  Enjoy!

For this episode we had a great conversation with Works By A Hurst aka Jason Hurst.  If you're not following Jason on his channels you're really missing out.  Jason is known for many things but most of all his sculpting and art work.  We talk about what got him into metalworking and where he sees it taking him in the future.  We hope you enjoy this episode and pick up a few great tips along the way. Thanks for listening everyone!  Enjoy! Thank you Bugo.com for sponsoring this episode!!

For this episode we reached out to you all on Instagram for some questions so we could do a listener Q&A and received a lot of great questions for that story. We picked a few to chat about and just let the conversation flow! We hope you enjoy this episode and have a great week! Be sure to head over to Bugo.com to check out their K-Bug System! This is smaller compact unit that can run continuous welds a long with programmable stitch welding. Might be just what you need for your next project!

For this weeks episode our guest is Tig Junkie aka Patrick Murray.  We had a chance to meet Patrick at Fabtech this past year.  He flew all the way from Australia to join in on the fun.  During our conversation we chat about what got Patrick into welding among many other things!  We hope you enjoy this weeks show.  Thank you again for listening!  Thank you again to Bugo.com for Sponsoring this episode! Be sure to follow on Instagram @bugosystems

We thought it would be a good time to talk about Grinders.  Why you might ask?  Because we all have a need for them in almost ever aspect of welding.  They might not be the most glamorous tool in our toolbox but at times they can be very valuable.  Also does cost and brand really matter?  These are the things we chat about this week.  Hope everyone has a great week!  Enjoy!  Thank you Bugo.com for sponsoring this episode!