360 with 360 WoodWorking Podcast

In this episode of 360 with 360WoodWorking, the 360 guys answer a question from a listener about paper-backed veneer. One of the guys has used paper-backed veneer in the past on a project using a controversial method of adhering it to the substrate. The other isn’t so sure about the product at all. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys. Check out our YouTube channel this Saturday for something extra special (or you could check it out now for the regularly scheduled special stuff).

In this episode of 360 with 360WoodWorking, the 360 guys tell some whacky recognition stories – just a bit of fun for this Independence Day weekend. We want to wish all our US fans a happy and safe holiday. Tune in next week for something very special. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys talk about string thickness. No, not that kind of string – we’re talking inlay stringing. Is there a correlation between string thickness and veneer? What was the size of stringing on original pieces and are we changing it? If so, why? The hosts tend to disagree. Listen and let us know where you fall. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys talk about whether SketchUp is a modern shop necessity or if it’s just nonsense. Both hosts are asked at shows, presentations and in classes they teach if the program is worth all the frustration to learn. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys talk about clamp racks and their team-up with woodworkingweb.com for their very first ever contest. Click on the link, post a blog with your design and you could win one of two free memberships to 360 WoodWorking. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys talk about cleanliness in the shop. How often should you clean and how obsessive should you be about it are just two of the things they discuss. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss their favorite oddball, or freaky, finishing techniques. And while their both ending up with similar results, their methodologies differ greatly. See which one does a whole lot of extra work and if it’s worth the effort. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss turnings that aren’t for furniture; no legs, finials or rosettes here. It seems both of the 360 guys got their woodworking start at the lathe. Where did you get your start? And have you done any turning that wasn’t destined to be part of a case piece? Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss what exotic wood they’d most like to use for an entire project. Each has a favorite and reasons why they’d choose a particular wood. What exotic wood would you choose? Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss address a topic suggested by a listener (almost). Dyami Plotke (is there another?) wanted to know Chuck’s and Glen’s thoughts on how long clamps should be in place. He also wanted to know their thoughts on PVA versus CA glues. In the end, they’re not sure if they answered Dyami’s questions or not, but they certainly tossed out some woodworking nuggets. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss whether large horsepower routers are a necessity or just a macho shop ornament. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the guys discuss cleaning spray equipment. Are they hyper-cleaners or do they believe cleaning a spray gun happens only when necessary? Hear their rationale for why they do what they do. There might even be a tip or two in this episode for ways to quickly clean your spray equipment between finishing sessions. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, the 360 guys discuss what gauge pin gun you should have in your shop. The two woodworkers agree on one of the gauges, but it takes a little convincing to get them to agree on the second gauge. Do they think a shop should be outfitted with 16-, 18- or 23-gauge pins? Or is there another choice you should make? Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, Chuck and Glen talk about their favorite methods for cutting circles. Who uses a router and who uses a band saw? Does either of them use a lathe? For the answer to these and other pressing questions, you’ll have to listen. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.

In this episode of 360 with 360WoodWorking, Chuck and Glen talk about through versus concealed mortise-and-tenon joints. Find out which of the guys hardly ever uses through mortise-and-tenon joints and which was drawn into woodworking by high-style Chippendale furniture. Join the guys twice each week for six lively minutes of discussion on everything from tools to techniques to wood selection (and more). Chuck & Glen, and sometimes a surprise guest, all have their own opinions. Sometimes they agree and sometimes they don’t, but the conversation is always information packed and lots of fun. If you have topics you’d like to hear covered in future episodes, click here to send an email to the guys.