Summary: [singlepic=2785,188,125] Jim of Tropical Blends Surf talks about the different type of fin box that they have on their surfboards and why they use such. He also explains to us the importance of fins and how they affect performance on any watercraft.He says that you don't have to necessarily change the board if you're not satisfied with its performance, and that the fin is a really cheap way to change the board.Tropical Blends Surf puts a huge emphasis on fins and has on a display a variety from different manufacturers.(click thumbnail to launch video)Tropical Blends: Letrsquo;s talk about fins for a minute. The most important thing that I want to say about fins is that I have a lot of fins. Irsquo;m very very in to fins. Fins make a huge difference in to any kind of watercraft, any surfboards. And you can see by the variety of shapes that I maintain in the shop that every one of these have a sort of different purpose. Here you just grab anything, this is sort of the old school brewer, the single fin. Now in this particular shop, I actually sell single fin boards. A lot of people think you can just grab any fin and put it on a single fin board, itrsquo;s not true. If yoursquo;re going to ride a retro or old school surfboard, you need an old school fin to make the board perform like it was going to. I have a brand new (_____) over there that he just built for me and he sent me the fin, he gave me the fin with the board. And you look at it; itrsquo;s very similar to this. We got some Old Brewer templates for single fins. We got some cutaway fins. This fin would be very good because it has got very little base on it and kind of a cutaway neck here for pivoting the board. If you want to come down, I donrsquo;t know if you have this experience when yoursquo;re surfing long board especially, itrsquo;s not a real slow, itrsquo;s kind of a running wave with a little bit of wall on it, and itrsquo;s not very big ndash; you donrsquo;t have a lot of time to come down at the bottom, turn, and get the board lined up again. So what you do with you knees and ankles is actually pivot the board, and then immediately walk forward on it. And then it just letrsquo;s you run down the wall, right? And this fin will help you to do that because you have very little resistance over here. Then you get something else. This fin is way more like a pivot fin, more straight up. The more the rake, fins in general want to follow that break line. As you come out of your turn it wants to follow that. The more straight up and knocked down they are, the more they want to pivot the turn, and Irsquo;m exaggerating but thatrsquo;s the case. This is more of a pivot fin. Letrsquo;s find something with a little more rake in it. Even this, we got a little bit more tip so yoursquo;re wanting to have some release off the top, some push off the bottom. Usually yoursquo;re getting your push from the width of the base. But therersquo;s just a huge variety of fins. And even if you pan over this way and look at thehellip; I got more fins over here. These are all for short boards and thrusters or whatever but fins are absolutely critical. What I always say to people, the fin is a really cheap way to change the board. If the board isnrsquo;t working right, get a different fin. Donrsquo;t get rid of the board. I get people coming in here who want to sell their used board; their fins are rusted in place. ldquo;Oh I hate this boardrdquo; or ldquo;I never really liked this board.rdquo; I go, ldquo;Thatrsquo;s totally the wrong fin for that board.rdquo; ldquo;Yeah, well thatrsquo;s what they gave me at the shop.rdquo; So therersquo;s a mentality of the guy who gave it to you, well hopefully he did know what he was doing, but in that particular case or this particular case maybe, have an experiment ndash; see what suits your need better. But fins are cheap. Even a hundred dollar fin is cheap compared to a surfboard. I...
