Welding Tips and Tricks Podcast

For this weeks episode we had a great conversation with Joe Lynch from @lynchsmetalfab on Instagram.  Joe's story is a little different from most and really shows that just taking that first step is all you need to do to start the crazy ride of running your own company.  We hope you enjoy this episode and it might make that little fire inside you grow a little more to take your first steps, too.  

For this weeks Stubby Roy answers a question about what do you look for at a company when you're going into take a weld test.  Have you ever really thought about it?  Maybe after this one next time you're applying you'll put these tips to use!  We hope you enjoy this weeks Stubby!   Thank you CKWorldWide.com for sponsoring this Stubby Episode! Be sure to ask for CK Worldwide's great products at your local supplier!

For this weeks chat we take a look ahead at 2020 to see what we have planned and what we hope to see happen.  We hope you have taken a few minutes to really think about what you'd like to see in your world this coming year.  If not, maybe this episode will help you stop for a minute and think.  Have a great week!  

For this Stubby Jody is talking answering a question about Work Ethics.  We hope you're able to pull out a few good tips from this one that will help you in your career as a weldor or whatever trade you might be in!  Thank you for your support and be sure to share this podcast with your friends!  Enjoy! Thank you to CKworldwide.com for sponsoring this Stubby. Be sure to check out all of their great products and remember they are the Standard for all your Tig welding needs!

For this episode we had a great conversation with Works By A Hurst aka Jason Hurst.  If you're not following Jason on his channels you're really missing out.  Jason is known for many things but most of all his sculpting and art work.  We talk about what got him into metalworking and where he sees it taking him in the future.  We hope you enjoy this episode and pick up a few great tips along the way.  Enjoy!

Well, we made it to the end of 2019.  In all honesty it went by in a blink.  For this episode we thought it would be fun to take a look back at not only this past year but the past decade.  We hope this episode inspires you to do the same thing and look back at how much your life has changed in the past 10 years.  Are you happy with what you see?  Would you have changed anything?  These are what we asked each other.  Hope you have a great New Years and start off this next decade with a bang!  Enjoy!

For this week's Stubby Jonathan answers a question about being picked on at work.  This is something that we all have dealt with either being new in the industry or sometime just being the new weldor in a shop.  Hope this sheds some light on the subject.  Enjoy!    Thank you to CK Worldwide for sponsoring this Stubby Episode!

For this weeks episode we had a great conversation with Pete Murphy from ISOTunes about hearing protection.  This is something we always think about after the fact or sometimes not at all.  I know when we're young we think we do not need any protection but that comes as a cost as you get older.  Hope this episode helps you think about your hearing before you start you day at work, everyday!  Have a great week!  Enjoy

For this weeks Stubby episode Jody talks all about Gas Flow Settings.  We're sure you'll pick up a few tips in this short episode!  Thank you for all your support and be sure to send in your questions to Weldingtipsandtrickspocast@gmail.com. Enjoy! Thank you to CKWorldwide.com for sponsoring this Stubby Episode! Be sure to check out all of CK Great products! They are the Standard for all your Tig Welding needs!

For this episode we had a fun chat with @deepsouthdimestacker aka Brad Goodman.  During this chat we covered a lot of ground from what got Brad into welding, running a business, fixing boats, and much more.  We hope you enjoy this chat as much as we did!  Thank you for listening and be sure to share the podcast with your fellow co-workers!  

This weeks Stubby is about holding Tolerances.  If you lay beautiful welds and blow the dimensions you just made a nice looking piece of scrap.  Roy tells us a little more about his process when it comes to holding tolerances.  Enjoy Thank you to CK Worldwide for sponsoring this Stubby Episode! If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line.  Thank you!

For this weeks topic we chat about Tig Brazing!  Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle.  We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best.  Hope you get a few good tips out of this one!  Enjoy

This week's Stubby was recorded live at Fabtech between Jody and Sidni Hinesley from Georgia Trade School.  The audio is a little rough but the content is great.  We hope you enjoy this Stubby and have great week!    If you would like to hear your question answered on a Stubby Episode be sure to send it to WeldingTipsandTricksPodcast@gmail.com  

For this weeks topic we went with a requested topic from our Live recording at Fabtech and we have also been asked to talk about this many times before. This topic is Tig welding Anodized Aluminum. There are many ways to weld this but we talk about the ways we have done it before in the past. Hope you can get some good tips from this one and when an anodized job comes across you bench you'll feel more comfertable of where to start. Enjoy! 

For this weeks Stubby Jonathan answers a question about Quitting.  This is one that all of us have had to ask ourselves before sometimes more than once.  We hope that this Stubby might help you answer your questions abut quitting.   Thank you CKworldwide.com for sponsoring this Stubby Episode