Podcast – Woodworking Online
Summary: An online source of information for the connected woodworker.
How do you mill a cove in a long workpiece without a shaper? How about jointing a square edge without a jointer? Both of these questions will be answered by Doug Hicks during this seminar podcast. Doug will also show you how to add tapers using a jointer; rout dovetails for dovetail keys on a router table; and even turn a spindle with a router, portable hand drill and a special jig. Get the seminar guide here: 5 Surprising Woodworking Techniques
This seminar isn’t about what you need — it’s more about what you don’t want to be without when you get started on a finishing project. All of them are items that you’ll find yourself reaching for regularly. And having them all on hand at the start of a project is the secret to a top-notch finish. Get the seminar guide here: 12 Must-Have Finishing Supplies
Watch demonstrations of three innovative joinery techniques: Miller Dowels, Beadlock Loose Tenon Joinery system, and Domino from Festool. Get the seminar guide here: 3 New Innovations in Joinery
It’s hard to underestimate the importance of the table saw in the modern home workshop. It’s great for ripping, crosscutting, cutting sheet goods down to size, and it handles dadoes, rabbets, and grooves with ease. But what if it hasn’t been set up correctly? Then it’s just a big anchor in the middle of an unused shop. Vince Ancona takes us step-by-step through his routine for accurate set up and maintenance of a table saw. By the end of the seminar, you’ll have learned how to vastly improve the quality of the cuts you make with your table saw. Get the seminar guide here: Table Saw Set Up & Maintenance
I asked associate editor Randy Maxey why hand planes are an important part of a modern woodworking shop? Here is what he told me: “I know a lot of people think I use hand planes just because I’m old-fashioned. The truth is, I love my machines. But if you want to do quality work in your wood shop, you need to learn to use hand planes. I use at least one of the three planes I’m demonstrating almost every time I’m in the shop. It has changed the way I do woodworking. I really agree with a line I read once in an old, old issue of Woodsmith magazine. It said, ‘…no machine can come close to the quality of work a hand plane will do.’” Get the seminar guide here: Three Hand Planes Every Shop Should Have
Phil Huber, a senior editor for ShopNotes magazine details in this seminar all the steps necessary for building a sturdy set of drawers on a router table. First, he’ll demonstrate how to build drawers using a specialized drawer joint bit in just two simple steps. Then, for those of us who choose not to buy the special bit, Phil will take us through the steps of building drawers with an ordinary 1/4″-dia. straight bit. Get the Seminar Guide here: Building Drawers Using Drawer Joint Bits
Ready for a kitchen remodel complete with all-new cabinets? Finally building that entertainment center? Or are you just wondering how to cut a sheet of plywood down to size on your table saw? Then this seminar is for you. There is no doubt that working with plywood can be a challenge. According to Dave Stone, a full sheet of 3/4″ hardwood plywood can weigh anywhere from 60 to 100 pounds. And the last thing you want to do is drop it on a corner or have excessive chip out when you cut a piece down to size. Check out the Woodsmith Podcast Store, or get the Seminar Guide here: Tips for Working with Plywood
Keeping your turning tools sharp — before, during, and after a turning session is extremely important. Brian Simmons prefers the Wolverine system from Oneway, using their grinding jig with the vari-grind attachment to put a fine edge on his turning tools. If you’ve seen earlier seminars presented by Brian, you know that he constantly uses his General 6″ bench grinder to sharpen his gouges, skews, scrapers and parting tools. Brian prefers this 1800rpm grinder and uses an 80-grit aluminum oxide stone for most applications. Be sure to check out the Woodsmith Podcast Store for a link to the Seminar Guide that Brian used during this seminar, plus a few sharpening accessories for sale.
Robby Pedersen has spent almost 20 years teaching cabinetmaking to young people. His shop and showroom — RVP~1875 — in Story City is a destination stop for school children throughout central Iowa. Before starting his business making reproduction furniture, Robby ran the period cabinet shop at the Living History Farms in Clive, IA. During this seminar podcast, Robby will demonstrate cutting dovetails with the same tools and techniques used by pioneer craftsmen of the 1800s. You’ll find a link to the seminar guide, distributed at this seminar, for sale at the Woodsmith Podcast Store.
If you’ve checked out a copy of Woodsmith or ShopNotes in the last couple of years, you may have noticed that articles about hand planes and their use have been showing up a little more often. That’s mostly because we have an editor who takes an active interest in promoting their usage — Randy Maxey. Randy will spend an hour during this Woodsmith Woodworking Seminar Podcast to give us his tips for tuning up a hand plane, a very important procedure if you’ve ever tried to use one. As you may know, an out-of-tune plane, with a dull or nicked iron, can be a real pain to use. This seminar is for “users,” not “collectors.” Be sure to check out the Woodsmith Podcast Store for links to a few products that Randy used during this seminar. There are also links to Seminar Guide at PlansNow.com
If there is one power tool that lends itself perfectly to accessories it’s the table saw. Things like push sticks and stop blocks can make using a table saw more efficient and safe. And, auxiliary fences for the miter gauge and the rip fence prevent chip out and protect the factory fence from being damaged. Best of all, each of these accessories can easily be made in the shop. This week’s Woodsmith Woodworking Seminar focuses on seven accessories that are “must-haves.” You’ll find a few pieces of hardware, that can be used for building jigs, for sale at the Woodsmith Podcast Store, plus a link to the seminar guide.
If I had the time, I’d build every project with hand-cut mortise and tenon or dovetail joinery. But that’s not a very realistic goal, nor is it necessary. There are plenty of joinery methods out there that can be made both quickly and easily. During the seminar podcast, I’ll talk about three of my favorite “quick and easy” joinery methods. One of the most “traditional” methods is the lap joint. It’s easy to cut with just one setup on the table saw. And it provides plenty of face grain gluing surface as well as a good amount of mechanical strength. For a couple of “modern” joinery techniques that are especially quick and easy, you’ll have to purchase specialized machinery to produce them. I’m talking about biscuit joints and pocket hole joinery. Both of these methods get their mechanical strength from distinctive fastener’s — biscuits or pocket screws. But the best part is that each can be setup and cut in seconds. Be sure to check out the Woodsmith Podcast Store for links to a few products that I used during this seminar.
Doug Hicks doesn’t just go through the motions when he presents a seminar. With all his years of woodworking and teaching experience, he really provides a wealth of knowledge and know-how. During this seminar podcast, Doug will explain why a router table makes a router even more versatile. His tips for buying or building a router table are well-researched and insightful. And he’ll present some special techniques and tips to make your work on a router table easier, safer, and more accurate. Be sure to check out the Woodsmith Podcast Store for links to a few products that Doug used during his seminar.
Great looking projects don’t just happen — they’re made. It takes a lot of time and effort to come up with the best looking lumber to create a project that really stands out. Dennis starts the seminar by discussing the differences between “hardwood” lumber and the stuff you’ll find on the racks at the lumber yard. Then he talks about board footage, grades, surfacing, moisture content, and finally, how to choose the best parts from a board for a particular project. During the seminar, Dennis keeps reaching for a tape measure. The one he used is available at the Woodsmith Podcast Store, along with a few other items he uses to make selecting lumber easier.
Phil Huber proves you don’t need a drawer full of router bits to make a huge variety of moldings. In fact, during this week’s seminar he talks about how he used just three bits, 1/4″ and 1/2″ round-over bits and a 1/4″ core box bit, to make 17 different moldings.To make some of the profiles shown above, he used different parts of the bit or changed the depth or height of the cut. Of course, to make the more complex profiles, he used more than one bit. With only a limited amount of time to rout the profiles, Phil wasn’t able to demonstrate all of the molding cuts, but the guide details how to rout all seventeen. You can find the guide, plus the bits he used during the seminar, for sale at the Woodsmith Podcast Store.